Minolta CF910 User Manual
Page 128
4-12
2. Color Adjust Mode (Professional)
Pr
of
es
si
on
al
W
a
y t
o
Ma
k
e Co
lo
r
Cop
ies
Chapter 4
Color Adjust Procedure (Professional: Other Than Color Balance)
Touch
and select the item for
adjustment.
Touch
.
(Ex.: When “Hue” is selected)
Position the image area of the original you
want to check for color in the Test Area on
the Glass.
Press the Start Key. This causes the copier to
output a sample copy showing seven images,
each representing a different level of
adjustment for the selected item.
Select the sample you like best, then touch
.
If you would like something in-between
(e.g., a hue level between +2 and +3), touch
. Then, touch
or
as
necessary to fine-tune the level.
NOTE
“Sharpness” does not permit fine-tuning.
Place the original in position again and press
the Start Key.
1
Professional
1154P188CA
2
Test Print
1154P260CA
3
1154P277EA
4
5
OK
1154P190CA
Fine-Tune
+
–
1154P191CA
6