Minolta CF910 - Manual (Page 155)

5-5
3. Copy Track Functions
Sett
ing
t
h
e
Utilit
y Mo
d
e
Chapter 5
Programming the Access Numbers
Press the Utility Key and touch
.
Enter your administrator code number from
the 10-Key Pad, then touch
.
NOTES
• Your Technical Representative sets or changes
the administrator code number. Consult him or
her for more details.
• Be sure to remember your administrator code
number.
Touch .
Touch .
NOTE
If
has been selected, the
key cannot be selected.
Touch and then using the or
key select the account number for which
you want to program an access number.
Enter the desired 4-digit access number from
the 10-Key Pad and touch
.
NOTES
• If you set a new access number for an account
which already has an access number, the old
number will be erased.
• If an access number entered already exists, it is
canceled. Please enter a new number again.
• If you want to program an access number for
another account, repeat steps 4 to 6.
1
Admin. Mode
1154P412CA
2
OK
1154P416CA
3 Copy Track Functions
1154P417CB
4 Access # Input
1154P463CA
OFF
Access # Input
5 Access # ▼
▲
1154P457CA
6
OK