Minolta CF910 User Manual
Page 123
4-7
Pr
of
es
si
on
al
W
a
y t
o
Ma
k
e Co
lo
r
Cop
ies
Chapter 4
1. Using the Applied Input
Output Functions
Place the original on the Original Glass or in
the Duplexing Document Feeder.
Touch
.
Place the OHP transparencies on the Manual
Bypass Tray. The side and edge on which
white tape has been affixed, should be face
up and towards the bypass port.
Select the size of the OHP transparencies
loaded in the Manual Bypass Tray.
Touch
.
Select the Tray in which the interleaves are
loaded and touch
.
NOTES
• If you make copies from an original set, one
page after another, via the Original Glass,
make them in descending page order.
• If you want to use a Sorter or Staple Sorter for
the copy run, remove the copy (OHP
transparencies) as soon as it is fed into the bin.
If it is left in the bin for a while, it can curl.
• After making copies on the OHP
transparencies, peel off the white tape affixed
onto them.
Select whether you want to copy on the
interleaves (Yes) or not (No) at “Copy onto
Inserts.”
OHP Setting Procedure
1
1154O008AA
2
OHP
1154P140CA
3
1144O014AA
4
1154P299EA
5
OK
6
OK
1154P300EA
7
1154P326EA