Minolta CF910 - Manual (Page 102)

3-24
M
a
ki
ng
C
o
pi
es
Chapter 3
4. Input Output Mode
Instructions for Loading Originals
Use the following procedure for loading originals to make 1-sided copies from 2-sided originals.
Load the originals crosswise.
If the originals are loaded lengthwise, the directions of the copy images will be mixed up.
Correct: Incorrect:
• Place the open book so that its top edge is at the rear of the copier and the center of the book is aligned
with the Book Marker indicated on the Original Length Scale.
• Make copies in descending order of page.
• Select the desired zoom ratio and copy paper size.
When the 2-in-1 mode is selected, the copier automatically selects a reduced zoom ratio. However, you
can choose another zoom ratio by changing the User’s Choice setting. ☞ p. 5-15
Procedure
2-Sided Originals
Loaded Crosswise 1-Sided Copies
1151O023AA
2-Sided Originals
Loaded Lengthwise 1-Sided Copies
1151O022AB
Precautions for Book Copying
Placing the Book on the Glass Correctly
Original Length Scale
1154O003AA
Book Marker
1155O027AA
Precautions for 2-in-1 Copying