Motorola i2000 - Manual (Page 97)

Accessories
95
Cigarette Lighter Adaptor Operating Specifications
Operating voltage range: 10.8 - 33.0 Vdc.
Operating temperature range: -30°C to +60°C
Desktop Dual-Pocket Charger
The NTN1627 Desktop Dual-Pocket Charger charges Motorola authorized
batteries, as listed on page 91, for the i2000 phone.
Figure 4.
1 Plug the flat end of the power-supply cord, with the logo facing
down, into the receptacle labeled “Charging” on the back of the
charger.
2 Plug the transformer end of the power-supply cord into any standard
AC wall outlet.
3 Insert an i2000 phone with an attached battery, into the charger’s front
pocket. This is done by inserting the bottom of the i2000 phone into the
pin connector in the bottom of the charger’s front pocket.
4 If the i2000 phone is properly seated in the front pocket, the charger’s
front pocket LED indicator will light green to indicate that the battery is
being charged. If a battery is in the rear pocket and the i2000 phone
with a battery is inserted into the front pocket, the battery in the front
pocket will charge to full capacity before the battery in the rear pocket
is charged. The LED for the rear pocket will flash yellow, indicating
that its battery is waiting to be charged.
5 The charger has the capability of displaying the battery’s charge status.
The indicator will show the following: solid red=1-30%; solid yel-
low=31-60%; flashing green=61-90%; solid green=91-100%.
Rear Pocket Front Pocket
Pin Connector Power Supply Cord
LED
Indicators