beautypg.com

How to insert a document, Sending, Sending a fax with on-hook dialing or a handset – Muratec M860 User Manual

Page 23

background image

Getting Started

1.16

How to Insert A Document

Your document feeder will hold up to 10 sheets of normal-weight copier paper.
To insert a document into the fax machine:

1. For multi-page documents, fan the pages leading

edges of the pages in your document. Each page of
the stack should extend slightly farther than the page
on top of it.

2. Adjust the document guides so that

they slide along the sides of your
document.

3. Insert the document face down into

the feeder.

Sending

Here’s how to fax a document.

1. Insert the document. Adjust the contrast and resolution if necessary.

Fax Norm Norm

To adjust the resolution and contrast:

• Press

mode/enter

to change resolution.

• Press

contrast/cancel

to change contrast.

2. Enter the fax number using a one-touch key, speed-dial number, or the

numeric keypad.

Note:

For information on entering one-touch and speed-dial numbers, see

pages 2.5-2.7.

123-4567

As you can see, you enter any access codes along with the number. If you
need not dial any codes, enter only the remote fax number.

3. Press

start

. (If you use a one-touch key, there’s no need to press

start

.)

Your fax machine simply dials the other fax. When it makes contact, your
machine feeds the document through, scanning and transmitting it as it goes.

123-4567

Note:

If the remote fax is busy, your fax will automatically attempt the call

again. See “Redialing”, next page.

Sending A Fax with On-Hook Dialing or A
Handset

1. Insert the document. Adjust the contrast and resolution if necessary.

Fax Norm Norm

To adjust the resolution and contrast:

• Press

mode/enter

to change resolution.

• Press

contrast/cancel

to change contrast.

2. Pick up the handset or press

monitor/call

and listen for a dial tone.

3. Enter the fax number using a one-touch key, speed-dial number, or the

numeric keypad.

Note:

For information on entering one-touch and speed-dial numbers, see

pages 2.5-2.7.

123-4567

4. When you hear fax tones from the remote unit, press

start

.

Note:

If a person answers the phone, tell him or her you’re trying to send a

fax. When his/her fax machine sends you fax tones, press

start

.

5. If you’re using the handset, hang up after pressing

start

.

If you’re using the monitor, your fax machine will do the rest.

Note:

If the remote fax is busy, see “Redialing”, next page.

This manual is related to the following products: