Muratec M860 - Manual (Page 15)

Getting Started
1.8
Program Key
Any function can be started by first pressing program and then enter the function number, or by pressing program or contrast/cancel scroll key repeatedly until the
desired function appears on the display.
Delayed Trans.
Polling
1. Polling Doc. Set
2. Polling Rx
3. DB Polling
Relay Broadcast
Secure Mail
Review Command
List Print (for M880)
1. Print Settings
2. Print One-Touch
3. Print Speed-Dial
4. Print Journal
5. Print Commands
6. Print Coverpage
7. Print Voice Mail
Note 1
8. Print Caller ID Note 2
Settings
01. Set One-Touch
02. Set Speed-Dial
03. Set Passcode
04. Set Fax Resol.
05. Set Fax Report
06. Set # of Rings
07. Set Silent Mode
08. Set Coverpage
09. Set Auto Journal
10. Set Remote Diag.
11. Block Junk Fax
12. Set Alarm Clock
13. TX Protection
• Set TX protect
• Set passcode
14. User Install
• Set clock
•
Set your TTI
•
Set phone type
15. Connect PC Note 3
Scramble
1. Scramble Copy
2. Unscramble Copy
3. Set Scramble RX
TAD Settings Note 1
1. OGM1
2. OGM2
3. Set Access Code
• Remote Access
• Voice Mail Box
4. Set Rec. Time
5. Set Remote TAD
6. Set Pager Number
7. Set Pager
8. # of Pager Call
9. Voice Mail Box
Note 1 : These functions are available only for M880.
Note 2 : Caller ID feature (see page 1.22) is available only for
HongKong and Singapore.
Note 3 : “Connect PC” feature is available only for M860.
1
2
3
4
5
6
7
8
9
List Print (for M840 and M860)
1. Print Settings
2. Print One-Touch
3. Print Speed-Dial
4.Print Journal
5. Print Commands
6. Print Coverpage
7. Print Caller ID
Note2