Mitel 8500 - Manual (Page 25)

Mitel ® 8500 Telephone User Guide – Issue 14, June 2010 Page 13
Personalizing Your Telephone
Resetting the Telephone to the Default Settings
Resetting the telephone to the default settings does the following:
• Returns all volume settings to the default levels. See “Changing Volume Levels” on
page 7 .
• Cancels Background Music. See “Listening to Background Music” on page 8 .
• Cancels Callback (queue) requests. See “Requesting a Callback (Queuing the
Telephone)” on
page 16 .
• Restores Handsfree Mode. “Using Handsfree Mode” on page 21 .
• Cancels Manual Call Forwarding. See “Manual Call Forwarding” on page 24 .
• Cancels System Forwarding. See “System Forwarding” on page 24 .
• Cancels Do-Not-Disturb (DND). See “Using Do-Not-Disturb” on page 39 .
• Restores Page settings. See “Paging Other System Users” on page 41 .
• Resets hunt group calls. See “Hunt Groups” on page 43 .
To return your telephone to the default settings:
Dial 394.
Switching Keymaps
Keymaps are the default button assignments on your telephone. Your system administrator may
have programmed an alternate keymap, allowing you to switch between keymap assignments.
Contact your system administrator for more information.
To switch between keymaps when your telephone is idle:
With the handset on-hook, dial 399.
To switch between keymaps during a call:
Press (Special), and then dial 399.
Activating Door Relay
If the Activate Door Relay feature is enabled, you can unlock a door (i.e., “buzz” it open)
through your telephone.
You can enter the Activate Door Relay feature code while idle or while on a call. This allows you
to activate the feature while talking to a communications device mounted at the door without
first having to hang up. When activated while on a call, the feature will not affect the call in
progress.
You can add the Activate Door Relay feature to a phone keymap button, just like any other
station feature.
To unlock a door:
While idle or while on a call, dial 332. The door is unlocked.