McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 322)

13
13-10 McDATA UltraNet Edge 3000 User Guide
User Interface Commands for the UltraNet Edge 3000
fccnt proxy This command controls the Switch WWN Proxy. To enable Switch
WWN Proxy, issue the enable argument followed by the specific Fibre
Channel instance. To disable Switch WWN Proxy, issue the disable
argument followed by the specific Fibre Channel instance.
If Switch WWN Proxy is enabled, the Fibre Channel driver will
respond to Exchange Link Parameter (ELP) requests with the World
Wide Name (WWN) of the remote Fibre Channel Switch. If Secure
Fabric is enabled on either the Brocade or FC/9000 Fibre Channel
Switches, this option should be enabled.
fccnt stats backbone This command displays the status of the FCCNT backbone.
FCSW The FCSW user interface provides statistical and informational data
pertaining to the internal Fibre Channel Switch (FCSW) application.
For further information on the FCSW user interface commands, refer
to the “FCSW Commands” chapter in the UltraNet Edge Storage Router
Command Reference. The following sections highlight the commands
useful for troubleshooting.
fcsw cache This command displays the FCSW buffer cache statistics.
fcsw fabric This command displays all of the Fibre Channel fabric information.
fcsw prov This command displays the provisioning of the FCSW application.
fcsw queue This command displays all of the Fibre Channel queue information.
fcsw scr This command displays all of the Fibre Channel fabric ports that have
registered for State Change Notification.
fcsw stats This command displays the FCSW statistics.
fcsw switch This command displays the switch’s attributes and each Fibre
Channel port for which the FCSW module is operating as a F_port.
fcsw wan This command displays the FCSW WAN statistics.
FCXL2 The FCXL2 user interface is used to display information pertaining to
the configuration, status, and error counters on the FCXL2 Fibre
Channel card.
For further information on the FCXL2 user interface commands, refer
to the FCXL2 chapter in the UltraNet Edge Storage Router Command