McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 177)

8
Configuring FICON Extension 8-5
Configuring a 1x1 Ethernet Wide Area Network
2. Click the arrow next to the UltraNet Edge 3000 Series drop-down
menu and select the Edge3000 (1x1 - 1 Gbps Ethernet) node type.
3. Click in the Network Map to create an instance of the UltraNet
Edge 3000 node.
Adding a Fibre
Channel Interface If this if the first time you are adding an UltraNet Edge 3000 node
to the Network Map, the Default Fibre Channel Interface Type
drop-down list will appear. Select the type of Fibre Channel
interface for the network type you are configuring.
— The first time you see the Default Fibre Channel Interface
Type drop-down list, select the interface type you want as the
Fibre Channel I/F default. This sets the default that UltraNet
ConfigManager will use in each configuration. When
configuring FICON extension over an Ethernet WAN, select
FICON
.