Creating a ficon data path, Creating a ficon data path -20 – McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual
Page 192
8
8-20
McDATA UltraNet Edge 3000 User Guide
Configuring a 1x1 Ethernet Wide Area Network
20. Click Finish.
Once you have completed the above steps for a basic 1x1 Gigabit
Ethernet WAN configuration, your network map should look like
the following example:
21. Continue the configuration process by following the “Creating a
FICON Data Path” section in this chapter.
Creating a FICON
Data Path
After configuring the IP circuit, you need to establish a
connection between the FICON interfaces by creating a data path.
This procedure will complete the configuration process.