McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 248)

9
9-40 McDATA UltraNet Edge 3000 User Guide
Configuring Tape Device Extension
The default is 8.
12. Configure the Fibre Channel topology by selecting one of the
following choices in the Address Type drop-down menu:
13. From the LUN 0 drop-down menu, select either Emulate or
Passthru .
Show Source
WWN
Filtering
Select Fibre
Channel
Topology
Discover
LUN Count
LUN 0
Soft — The Fibre Channel topology comes up dynamically as
fabric or loop.
Hard — The Fibre Channel topology is forced to come up as a
loop.
P2P — The Fibre Channel topology is forced to come up as
point-to-point.