McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 130)

6
6-24 McDATA UltraNet Edge 3000 User Guide
Configuring a 2x2 Ethernet Wide Area Network
If the chassis software versions of the nodes you are creating a
data path between are at version 3.1.2 or greater, the Create Data
Path Wizard - Choose Data Path Options
dialog is displayed.
Otherwise, skip to step .
9. Check the Enable Disk Streaming box if you want to enable Disk
Streaming for the interfaces.
The Enable Disk Streaming check box is only displayed if you are
configuring a data path between nodes with chassis software
versions of 3.1.2 or greater.
10. Click the Next button.
The FC Switch DataPath Wizard - Finish dialog appears.