Motorola 2.1 - Manual (Page 29)

Chapter 2: Network Setup
If you choose another version of Red Hat Linux or an alternate distribution, the
content of this manual should only be used as general guidelines for the
installation process.
Minimum Software Requirements
The following table lists the software versions required to support the One Point Wireless
Manager™ application on the Linux platform.
Table 2-3 Software Requirements for One Point Wireless Manager
Device Software Revision
Red Hat Enterprise Linux ES 4.0 Update 5
Java Runtime Environment 1.6 or higher (included with Wireless Manager application)
MySQL 5.0.40 (included with Wireless Manager application)
Red Hat Linux Installation
Starting the Red Hat Enterprise Linux ES Installation
The MOTOMESH 2.0 One Point Wireless Manager™ application is designed to run on a 32-
bit version of the Red Hat operating system. If supported by the BIOS settings, booting with
the Red Hat Enterprise Linux ES CD inserted will initialize the installer. If this is not the case,
you may have to configure your server BIOS to boot from removable media first. Refer to
your server documentation for information on changing BIOS settings. The following section
describes how to install RedHat Linux using our reference design defaults.
You must install the 32-bit version of the Red Hat OS.
Installation of Red Hat Enterprise Linux ES
Complete Procedure 2-1 to install the Red Hat Linux ES software.
Procedure 2-1 Red Hat Enterprise Linux ES Installation on HP DL360 G5 Server
1 Insert the first Red Hat Enterprise Linux ES install CD and reboot the server. The system
should boot up to the following screen:
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot:
2-15