beautypg.com

Part ii – power cable with flying leads, Part ii – power cable with flying leads -11, Figure 9-3 – Motorola 2.1 User Manual

Page 112: Feed flying lead cable through components -11, Figure 9-4, Attach flying lead cable to the plug -11

background image

Appendix A:

Part II – Power Cable with Flying Leads

2.

The initial Power Cable will have four wires, cut the Red Wire back, as it is not used.

Figure 9-3

Feed flying lead cable through components

NOTE:

Be sure to cut the RED WIRE Back as it in not used

Part III – Power Connector and Cable Assembly Instructions

3.

Place the Connector parts over the Power Cable as shown below.

Figure 9-4

Attach flying lead cable to the plug

9-11

See also other documents in the category Motorola Hardware: