Motorola digital cellular phone - Manual (Page 76)

76
If the caller has restricted transmission of the phone number,
your phone will display
Private . If the Calling Number ID
information is not available to the cellular network, your
phone will display
No ID . This information will not be in the
Caller ID list as one of the last 20 incoming calls.
You can store any number contained in your Caller ID memory
to a memory location in the same way you would save any
phone number. Once the correct number is displayed, press
¬ and a memory location or « to autoload. See ”Storing
with the Menu” on page 44 for more information on storing
phone numbers.
Note: Caller ID is not available in all markets. Contact your
Service Provider for availability information.
To Use Caller ID
1. Follow the steps in the ”Getting to Phone Options…”
block above to scroll to
Caller ID . You will see
Caller ID XX No ’s . ( XX ) represents the total
numbers stored.
Shortcut:
Press
‰, then
press and hold
‰, and continue
with step 3 if you
have messages.
2. Press to enter your Caller ID number list.
3. Press to scroll through the list. The display shows
the call number in the upper left corner, with the
phone number of the last phone call displayed as
C00 , the next to last as C01 , and so on, through C19 .
If no numbers are in the caller ID list, you see Empty .
4. Press æ to dial the displayed number.
Note: To view Caller ID information prior to answering a call,
you must turn off the Open to Answer feature. (See ”Open to
Answer” on page 82.)
Clearing Caller ID
To erase all entries saved in your Caller ID memory:
1. Press and hold Ç when a Caller ID name and
number is displayed. You will see Clear? .
2. Press ¬ to clear.
or
Press º to cancel and leave your caller ID memory
intact.
or
TDMA.book Page 76 Thursday, October 29, 1998 9:52 AM