Motorola digital cellular phone - Manual (Page 68)

68
Managing Security Options
For your protection, you must enter the six-digit security code
to access the features that your phone contains. The factory-
programmed lock code for unlocking the phone is 123. The
six-digit security code is 000000. These may have been
changed when your phone was activated.
Viewing the Lock Code
Shortcut:
Press
ƒ, then
the Smart Button,
then
fi , fi ,
and continue with
step 3 above in
the “Getting to
Security Options”
block.
To display the active three-digit lock code:
1. Follow the steps in the ”Getting to Security
Options…” block to select
. View Lock Code .
2. Press to display your three-digit lock code. The
code appears for a few seconds.
3. Press º to exit, or scroll to other features.
Changing the Lock Code
To change your three-digit lock code:
1. Follow the steps in the ”Getting to Security
Options…” block to select
Change Lock Code . You
will see Enter Code ——— .
2. Enter the new three-digit code. You will see
Changed To XXX .
3. Press º to exit, or scroll to other features.
Note: If you try to change your lock code to 911 or the first
three digits of an emergency number, you will see
Code
Invalid , and the code you entered will not be accepted.
You will return to step 1 above.
1. Press ƒ , then press to enter the menu system.
2. Press to scroll to Lock Secure and press to select.
3. Press to scroll to the Secure Options submenu, and press to
select.
4. Enter your six-digit security code, scroll to the following features,
and press
to select.
or
or
Getting to Security Options…
TDMA.book Page 68 Thursday, October 29, 1998 9:52 AM