Motorola ME7052 - Manual

User's Guide Digital 1.8 GHz
MOTOROLA and the Stylized M Logo are registered in the US Patent and
Trademark Office. All other product or service names are the property of
their respective owners, © Motorola, Inc., 2007. All rights reserved.
Congratulations on your purchase of a Motorola product!
Your Motorola T elephone at a glance:
Welcome Welcome
Important Safety Instructions
Follow these safety precautions when using your cordless phone to reduce the risk
of fire, electric shock and injury to persons or property:
1.
2.
3.
4.
5.
6.
7.
8.
10.
Keep all slits and openings of the phone unblocked. Do not set the phone on a
hot surface or over a radiator. Ensure that proper ventilation is provided at
the installation site.
Do not use while wet or while standing in water.
Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
Do not allow anything to rest on the power cord. Place the power cord so that it
will not be walked on.
Never insert objects of any kind into the product slits as that may result in fire or
shock.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
Do not disassemble this product. If service or repair work is required, contact the
Warranty Service phone number found in the back of this user's guide.
Do not overload wall outlets and extension cords.
Do not use this cordless phone to report a gas leak, especially if you are in the
vicinity of the gas leak.
Reduce risk of fire and shock by:
Unplug this cordless phone immediately from an outlet if:
The power cord or plug is damaged or frayed.
Liquid has been spilled into the product.
If the product becomes submerged in water, Do not retrieve the base
until after you have unplugged the power and phone cords from the wall. Then
retrieve the unit by the unplugged cords.
The product has been dropped or the cabinet has been damaged.
The product exhibits a distinct change in performance.
Important Safety Instructions
For product-related questions, please refer to the Warranty section.
Please retain your original dated sales receipt for your records. For warranty service
of your Motorola Product, you will need to provide a copy of your dated sales receipt
to condfilm warranty status.
Complies with the essential protective requirements and objectives of the EC's R&TTE
Directive 1999/5/EC; EC Low Voltage Directive 72/23/EEC; EC EMC Directive 89/336/EEC
Copyright © 2007 Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by
any means or used to make any derivative work (such as translation, transformation
or adaptation) without written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes to content
from time to time without obligation on the part of Motorola to provide notification
of such revision or change. Motorola provides this guide without warranty of any kind,
either implied or expressed, including but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Motorola may make improvements
or changes to the product(s) described in this manual at any time.
MOTOROLA, the Stylized M Logo, and PhoneWrap are registered in the U.S. Patent
and Trademark Office. All other product or service names are the property of their
respective owners.
Read and understand all instructions and keep them safe for future reference.
Follow all warnings and instructions marked on the product.
Do not install this product near a bath tub, sink or shower.
Do not place this product on an unstable surface. This product may fall, causing
serious damage to the product.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive
work to restore the product back to normal operation.
Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents
to clean this phone.
1.
2.
3.
4.
5.
6.
7. Use only the power supply that came with this unit. Using other power supplies
may damage the unit.
Because cordless phones operate on electricit
y, you should have at least one phone
in your home that isn't cordless, in case the power in your home goes out.
To avoid interference to nearby appliances, do not place the base of the cordless
phone on or near a TV, microwave oven, or VCR.
It is impossible to make emergency calls when the keypad lock is enabled.
8.
9.
10.
These Operating Instructions are issued for information purposes. Their
content is not the subject of a contract.
All indicated data are merely nominal values. The described equipment and
country.
Technical Amendments
This device is dedicated to be used in the analog public switched telecomunication
network (PSTN).
Insert the plugs in the corresponding socket of the base station. Route the cable
beneath the telephone towards the back. Plug in the telephone plug.Insert the mains
adaptor in the wall socket. The base station is now ready for use.
Connecting the Base Station and Mains Adaptor
Package Contents
Base Station
Mobile Handset
Mains Adaptor
Telephone Line Cord
Rechargeable Batteries
type micro AAA
Charger Unit
User's Guide
Single Pack
1
1
1
1
2
0
1
Twin Pack
1
2
2
1
4
1
1
Triple Pack
1
3
3
1
6
2
1
Quad Pack
1
4
4
1
8
3
1
Do not expose the base station and charger unit to direct sunlight. Do
not allow the base station and charger unit to become wet. They should
not be set up in rooms which are subject to condensation or corrosive
steam or a high concentration of dust (e.g. cellars, garages or
conservatories). The room temperature must be between 0
0 C and 35 0 C.
Installation
Features
* user must subscribe to the network's caller id service.
+ more then one handset required.
+
Congratulations on your purchase of this high quality, cordless telephone set.
The set offers the following features:
Caller ID on Call Waiting
(dependent on network)
*
*
+
Programmable call barring
Operation with 2 standard AAA
re-chargeable batteries
Standards
Backlight display
Digital Answering Machine with 12
minutes recording time , 59 messages
capacity (for Model ME7060)
Features
Please check the contents of the package carefully. If s om ething is m is s ing or has
become damaged in transit, you should NOT use the telephone. In such a case you
should return to the dealer with your sales receipt or contact the Motorola's distributor
directly. (For details, please refer to the Warranty section.)
Setting up the Base Station and Charger Unit
Place the base station and charger unit in an easily accessible location. Make sure
the location, also make sure that all cables can be routed so as to prevent people
tripping over them. Furthermore, avoid placing the base station and charger unit in
the immediate vicinity of other electronic appliances such as microwaves, PCs or Hi-
Fi's, for example.We recommend a clearance distance of 1metre is kept between the
phone and other equipment.
Note: Retain the packaging of your appliance to prevent it from being damaged should
you ever need to return it.
1 2
4 5 6
3
7 8 9 10
11 12 13 14
Navigate in the menu structure as follows:
Press the Menu key.
Then use the arrow keys to navigate through the menu or select the required menu
item directly using the digit keys.
Example: Enter MENU > 3 > to access '1-RINGER' > '2-HS NAME', then enter the HS
Name.
Menu Structure
1.
2.
3. Press the key.
Press the number of the required handset (1..4) and wait for the called party to answer.
Press the
key to end the call.
If more than one handset is registered on the base station,
internal calls can be made free of charge.
Making Internal Calls
Press the key repeatedly until menu item LANGUAGE appears.
Press the
Press or as often as necessary to select the required language.
Press the
Ten different languages are available for selection for each handset.
Proceed as follows to select a language:
Selecting the Language
1.
2.
3.
4.
Switching the Handset On/Off
When the handset is placed on the base station or charging unit, it switches on
automatically and starts to charge up. Allow the batteries to be charged for 14 hours
On/Off switch.
Backlight
backlight
Note: If an external call is received during an internal
call, a beep will be heard.
Making External Calls
There are two ways to dial a number, namely direct dialling or on-hook dialling.
Press the key and wait for the dialling tone.
Dial the telephone number and complete the call.
Press the
key to end the call.
Directt dialling
On-hook dialling
Dial the telephone number.
Delete any incorrect entries by pressing the
key.
Press the key. The number entered is dialled and a
connection established.
Press the
key to end the call.
1.
2.
3.
1.
2.
3.
4.
Using the Telephone
1.
2.
3.
4.
Press the key and enter the number of the
corresponding handset (e.g. 2) which should be included in the call.
The external caller is put on hold. As soon as handset 2 takes the call, press
key to transfer the call to handset 2.
Or
The external caller is put on hold. as soon as handset 2 takes the call, press and
hold key to activate the teleconference.
By pressing the key, any of the handsets can be disconnected from the
teleconference and the other handset continues with the external call.
After having received an external call, it is possible to include
a second handset in the conversation (three-way conference).
1-VOLUME
2-EXT RINGER
3-INT RINGER
ON / OFF
ON / OFF
ON / OFF
CONFIRM?
SEARCHING
3-HANDSET
1-RINGER
2-HS NAME
3-PREFIX MEM
4-KEY TONE
5-AUTO ANS
6-CALL TIMER
7-DEF AULT
8-REGISTER
[-----]
MELODY 1-10
MELODY 1-10
2-PHONE BOOK
1-NEW ENTRY
2-LIST ENTRY
3-EDIT ENTRY
4-DELETE
5-DELETE ALL ENTER NAME ENTER NO
CONFIRM?
NORMAL RING
VIP RING 1-10
1-CALL LOG
5-LANGUAGE
ENGLISH,DEUTSCH,ITALIANO,FRANCAIS,ESPANOL,
PORTUGUES,NEDERLANDS,POLSKI,SVENSKA,TURKCE
4-BASE
1-BARRING
2-EMERGENCY
4-FLASH TIME
5-DIAL MODE
6-CHANGE PIN
7-DEF AULT
8-DEREGISTER
ENTER PIN
ENTER PIN
100/250/600
TONE
PULSE
ENTER PIN
ENTER PIN
ENTER PIN
HANDSET 1-4
1-
2-
NEW PIN
CONFIRM?
HANDSET 1-4
DISABLE
EXTERNAL
NUMBER
REPEAT
CONFIRM?
ENTER NO
On Handset and Base
On Answering Machine (for Model ME7060)
Display icons
Indicates the battey charge status/level.
No bars when battery is empty.
Indicates that the outside line is engaged.
Indicates an external call is in progress.
Indicates an internal call is in progress.
Indicates if you have unanswered calls.
(Details available in the caller list). Indicates that the keypad lock is on.
Microphone is muted.
Ringer is switched off.
Indicates the handset is registered on
the base.
Flashes if there is no link to the base.
Scroll(UP) or (DOWN) to see further
details of the entry.
The base station does not have a power switch. Make sure that
there is a mains socket nearby and that the mains adaptor is easily
accessible. Check that the voltage indicated on the mains adaptor
corresponds to that of your mains supply.
Flash (Recall)key, Access a Call
Waiting Line/Hold and transfer
calls when connected to PABX or
for use with network services.
When an external call is received, all the handsets registered and the base station
ring.
Taking Calls
1. Take the handset from the base station; a connection is automatically established
(when the AUTO ANS function is active). Otherwise, press the key.
2. Press the key to end the call.
on /charger cradle
9. Avoid using during an electrical storm.
Controls and Indication
Adjust the
handset volume
Cancel/Delete
Open the battery compartment, by pushing downwards on the cover.
Insert the 2 x AAA (600mAh/1.2V) Ni-MH re-chargeable batteries supplied,
observing the correct polarity.
CAUTION: Please do not use Alkaline or
non-rechareable batteries. It may cause
permanent damage to the unit and void
the warranty.
Non rechargeable batteries can explode and
cause injuries and heavy damage on your
environment.
Note: For fully discharged batteries, the handset will power on after a 15-minute
precharge.
It may result in serious injury.
Entering a Dialling Pause (P)
If the MOTOROLA telephone is connected to a PBX system, it may be
necessary to insert a dialling pause. To do this, press the key after entering the
relevant digit, e.g. 0, for an outside line (0P....). A 'P' appears in the display indicating
a pause. The pause can also be entered when programming numbers in the phone
book.
Alternatively, enter the
first letter of the name required.
Call Log Operations
If you have subscribed to the Network Caller Display service, the calls list will record
details of any call that arrives. To view the calls list:
Press the key as often as necessary until the CALL LOG menu appears.
Press the
key. Alternatively, press and hold the key.
Press the or keys to browse through the CALL LOG memory.
1.
2.
3.
Press the key to return the call. Or 4.
Press and hold the key two seconds to delete one or all the entries. Or
Press the key to enter the caller's details in the phone book.
Enter the name.
Press the
key.
5.
6.
7.
8.
9.
Press the or key to select the normal ring or VIP ring 1-10. 10.
Press the key
IMPORTANT: To use the CALL LOG function, you must subscribe to your network
operator’s Caller Line Identification (CLI) service.
Teleconference
Press the key to switch the microphone on
or off during a call.
Muting the Microphone
1.
VOL+ VOL-
Note:you may have to subscribe to a call waiting service. contact your telephone
provider for more information.
Access a Call Waiting Line / Holding and transferring calls (PABX)
When on an external call, press key to access a Call Waiting Line when you hear
the call waiting prompt signal. Press key again to toggle between the two calls.
When on an external call (PABX line)
1. Press key to put the call on hold.
2. Dial the number of the extension.
3. Press key again if you would like to take back the call, or to transfer the call.
Teleconference and Intercom Call Transfer
Intercom Call Transfer
It is possible to put an external call on hold and call
another handset registered to the base or to forward calls.
1. Press key to hold the external call and initiate an internal call.
2. Input the desired handset number (e.g. 2).
3. The target handset will ring. After the internal connection is made, press key to
transfer the external call.
4. If key is pressed before another handset is answered, the call transfer
procedure will be cancelled and the external call connection is regained.
5. If key is pressed before another handset is answered, both the external and
internal call will be disconnected.
Note: 1. The CALL LOG symbol and display indicator only disappear after browsing
through all the entries. 2. It is only possible to enter caller's details in the phone
book who are not already entered.
11.Press the key to save the entry.
Voice mail service
Voice mail is an automatic answering service offered by your service provider /
telephone company.If you subscribe to this service,your service provider/telephone
company’s voice mail system will answer calls for you when you are unavailable to
answer the phone or when your line is busy.Messages are recorded by your service
provider /telephone company,not your telephone.Please consult your service
provider/telephone company for details of this service.
Menu key-press to open
the answering machine
menu.
Volume down(-)-Press to
decrease loudspeaker
volume.
Volume up(+)-Increase
loudspeaker volume.
Page(Find Handset)key-
Press to locate a missing
handset/page all handsets
registered to the base.
Record/Memo key
Use to record your
outgoing message or
memo.
Rec./
Memo
Message indicator flashes
with the number of new
messages.
Delete key-Use to delete
messages /memos.
Replay/previous key
During message playback,
press to replay the current
message or press twice to
play the previous message.
Stop-Stops message playback.
Ends recording.
Charging indicator
Illuminates when the handset
is charging in the base station.
Next key-During message
playback,press to skip forward
to the next message.
Play
Call indicator
Flashes when you have
incoming calls.
Flashes when there has been
a Voice mail received.
Installation Guidelines
1.
2. Press the 0 key for two seconds.
Then dial the rest of the digits and press the key to establish a connection.
Note: The prefix number (e.g. an access code) must have been programmed before hand.
Refer to "Handset Settings".
Press the key.
Press the key to end the call. 1.
2.
Prefix Dialling
Press the key; the first entry in the phone book appears.
Press the or key to select the required entry from the phone book.
Alternatively, enter the first letter of the name required.
Press the key. The number is dialled. 1.
2.
3.
Dialling from the Phone Book
on /charger cradle
Paging Handsets
If you cannot locate a handset you can use the key on the base to help find it.
1. Press the key on the base.
All handsets registered to the base will ring and the display on each handset will
show Paging.
2. To stop the paging ring,press the key on the base again,or press any key on the
handset.
Note: All paged handsets will stop ringing if any key on the handset or page key on
the base is pressed.
If a VIP ring is assigned for that entry, a digit “ ” will be shown in front of the
name during the incoming call or browsing.
Phone Book
The display will show 1 - NEW ENTRY
1. If a VIP ring is assigned for that entry, a digit “ ” will be shown in front of the
name during the incoming call or browsing.
2.
When the function is supported by the telephone provider service and the
caller, the handset displays the name of the caller (when stored in the phone book).
Press the or key to select the normal ring or VIP ring 1-10.
You must subscribe to the network Caller Display service to use the VIP ring feature.
Model ME7050 Series
DIGITAL CORDLESS PHONE
Model ME7060 Series
DIGITAL CORDLESS PHONE
WITH DIGITAL ANSWERING MACHINE
Model ME7052 Series
DIGITAL CORDLESS PHONE
WITH SPEAKERPHONE
Handsfree (for Model ME7052)
Handsfree/Speaker key (for Model ME7052)
LED : Battery charging indicator
LED : Flashes with incoming calls
Paging key (call handset)
3-RINGER (-----) MELODY 1---
MELODY 10 (for Model ME7050/ME7052)
Key Lock
(For Model ME7052)
Redial Function
Press the key as offen as necessary to view the last 5 Redialled numbers and
Press the key to dial the Chosen number.