Motorola digital cellular phone - Manual (Page 18)

18
A new NiMH battery may require several full charge/
discharge cycles in order to achieve its optimum
performance. After this initial charge, you can recharge your
battery at your convenience, using the phone’s rapid travel
charger.
Quick Change Power Source
(“Seamless Connection”)
The quick change feature enables you to switch power
sources while a call is in progress without losing the call. If
you hear a low-battery warning while you are in a call, plug
your phone into the Cigarette Lighter Adapter or AC Adapter.
Charge Times
Locate your battery by type to see how long your battery
takes to charge to a 90% power level:
After the battery reaches 90%, it begins to slow charge until
it is fully charged. It is normal for batteries to become warm
during charging.
Battery Type
Charge Time (hrs)
Rapid Charger
NiMH Main (500 mAH) 1.25
Slim LiIon Main (500 mAH) 2.5
Extended LiIon Main (900 mAH) 3.0
LiIon Auxiliary (900 mAH) 3.0
TDMA.book Page 18 Thursday, October 29, 1998 9:52 AM