Gateway E SERIES E-6000 - Manual (Page 96)

90
Chapter 7: Adding or Replacing Components
www.gateway.com
Selecting a place to work
Work on your computer in an area that:
■ Is clean (avoid dusty areas)
■ Is a low-static environment (avoid carpeted areas)
■ Has a stable surface on which to set your computer
■ Has enough room to place all of your computer parts
■ Is near a grounded outlet so you can test your computer after installation
■ Is near a telephone (in case you need help from Gateway Technical
Support). The telephone must be directly connected to a telephone jack
and cannot be connected to your computer
Gathering the tools you need
Some tools and supplies that you may need to work on your computer are:
■ A flat-head screwdriver
■ A Phillips screwdriver
■ A notebook to take notes
■ Small containers to store various types of screws
■ A grounding wrist strap (available at most electronic stores)
Tips & Tricks When cleaning the case, do not use abrasive or solvent
cleaners because they can damage the finish. Use soap
and water or a dilution of 80% water and 20% isopropyl
alcohol. For more information, see “Cleaning your
computer” on page 67.