System board specifications – Gateway E SERIES E-6000 User Manual
Page 170
164
Chapter A:
www.gateway.com
System board specifications
The following specifications are for the standard configuration. Your system
may contain optional equipment. All specifications are subject to change
without notice or obligation.
Supported processors
Intel
®
Pentium
®
4 processors utilizing 478-pin FC-PGA2
connector
Chipset
Intel 850e
Memory
184-pin, 2.5V, PC800-40 or PC1066-32p Direct Rambus
Interface Memory Modules (RIMMs). Two channels, four slots
(two slots per channel). Expandable to 2 GB using PC800 or
1536 MB using PC1066.
BIOS
Intel BIOS. Flash BIOS for easy updates from diskette.
Hard drive interface
Supports four IDE devices using two on-board PCI IDE
connectors with PIO, Bus Master, and Ultra ATA 33/66/100
operation modes. Automatic drive type selection for easy
setup.
Diskette drive interface
A diskette drive controller is integrated on the system board.
Support is available for a single diskette drive.
Universal Serial Bus
(USB)
4 USB v2.0 ports, 2 USB v1.1 ports
■
4 rear ports (2 USB v2.0, 2 USB v1.1)
■
2 front ports (USB v2.0)
Mouse
PS/2 mouse port
Keyboard
PS/2 keyboard port
Input/Output connectors
■
6 USB ports (4 rear, support for 2 front)
■
High-speed serial port
■
Parallel (bi-directional, EPP, ECP) port
■
10/100 Ethernet (RJ-45) port
■
PS/2 keyboard port
■
PS/2 mouse port
LAN Subsystem
Integrated Intel
802.3 10/100 Mbit/sec LAN
Battery
2032-style