Gateway E SERIES E-6000 - Manual (Page 123)

117
Adding or replacing memory
www.gateway.com
To add or replace RIMM or C-RIMM memory:
1
Open the case by following the instructions in “Opening the case” on
page 92.
2
Find the memory module banks on your system board.
3
If you are removing a RIMM from the memory module bank, gently pull
the plastic tabs away from the sides of the memory module and remove it.
- OR -
If you are removing a C-RIMM from the memory module bank, gently pull
the plastic tabs away from the sides of the module and remove it.