Gateway E SERIES E-6000 - Manual (Page 112)

106
Chapter 7: Adding or Replacing Components
www.gateway.com
6
Install the new card into the add-in slot.
You can slightly seesaw the card end-to-end to help insert the card, but
do not bend the card sideways.
7
Push the add-in card retention cover inward, then secure the add-in card
retention cover with the retention thumbscrew.
8
If you disconnected any cables, reconnect the add-in card cables using your
notes from Step 3. For more information, see the add-in card
documentation.
9
Close the case by following the instructions in “Closing the case” on
page 95.
10
See the documentation that came with the add-in card for any special
software installation instructions.