Resetting the bios, To reset the bios – Gateway 920 User Manual
Page 64
59
Resetting the BIOS
www.gateway.com
Resetting the BIOS
The Reset BIOS jumper on the system board lets you return all BIOS settings
to the factory defaults.
To reset the BIOS:
1
Print the appendix for
in this guide.
2
Restart your server.
3
Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
4
Record any custom BIOS settings on your printout.
5
Follow the instructions in
“Preventing static electricity discharge” on
6
Turn off the server, then disconnect the power cord and all other cables
connected to the server.
7
Remove the side panel. For more information, see
.
8
Place the jumper across pins 3-4 of jumper J13.
Warning
Moving the jumper while the power is on can damage your
server. Always turn off the server and unplug the power
cord and all other cables before changing the jumper.
Jumper pins 3-4
- E-2300 (134 pages)
- E-4100 (144 pages)
- ALR 7300 (138 pages)
- E-4650 (134 pages)
- E-6300 (136 pages)
- E-9232T (96 pages)
- 610 (108 pages)
- ProfileTM 5 (292 pages)
- Profile 6 (130 pages)
- E SERIES E-6000 (190 pages)
- SZSL95IN0XXXXXXXX (132 pages)
- 8400 (34 pages)
- DX4800 (94 pages)
- GR380 F1 (17 pages)
- MAN FX510 (150 pages)
- GM5688E (140 pages)
- GR585 F1 (14 pages)
- 6400 (148 pages)
- GM5478 (2 pages)
- 7400 (156 pages)
- E-5250 (46 pages)
- FX6710 (1 page)
- E-9425R (118 pages)
- ALR 7200 (134 pages)
- FX542X (154 pages)
- 7250R (26 pages)
- 7250R (135 pages)
- DX430X (96 pages)
- 8450R (4 pages)
- 8450R (172 pages)
- 7450R (124 pages)
- E-5400 (130 pages)
- E-5200 (46 pages)
- PC (110 pages)
- GR160 F1 (14 pages)
- ALR 8300 (128 pages)
- eMachine 3 (96 pages)
- 9415 (188 pages)
- 980 (131 pages)
- 9210 (106 pages)
- E1400 (136 pages)
- FX542XT (94 pages)
- E3400 (126 pages)
- Media Center (28 pages)
- MT-6733 (3 pages)