Gateway 920 - Manual (Page 45)

40
Chapter 4: Installing Components
www.gateway.com
Installing PCI expansion cards
A PCI expansion card (sometimes called an add-in card) is a card used in the server
to add functionality to the system. Use the following procedure to replace, add,
or reseat an expansion card.
To replace, add, or reseat a PCI expansion card:
1
Follow the instructions in “Preventing static electricity discharge” on
page 25 .
2
Follow the instructions in “Opening the server case” on page 26 .
3
If you are replacing a card, disconnect any cables that are attached to the
old card.
4
Remove the thumbscrew that secures the expansion card retention cover
to the server case.
Thumbscrew