Genicom GEK 00031B - Manual (Page 92)

Chapter 4. Printronix P Series Emulation GEK-00029B 92
HOUSEKEEPING COMMANDS
Print Control Codes Forces the hex codes 80H to 9FH to become printable symbols in the
currently selected character set. Cancels the executable control code
operation activated by the SFCC 7.
Format
6
Decimal: 6
Hex : 36
BASIC: CHR$();”6”;
Indeterminate Conditions
This feature can also be selected from the control panel.
Execute Control Forces the hex codes 80H to 9FH to execute as control codes.
Codes Cancels the printable control code operation activated by the SFCC 6.
Format
7
Decimal: 7
Hex: 37
BASIC: CHR$();”7”;
Indeterminate Conditions
This feature is also selectable by control panel operations.
Emulation Reset Initializes all printing parameters to values previously saved. When
reset to the previously saved values, the current line is set to the top-
of-form position. Font, line spacing, international language selection,
margins, form length, skip-over perforation, and character pitch are
reset to previously saved values. Character-by-character and line-by-
line attributes are canceled. The vertical format unit is cleared.
Format
@
Decimal: 64
Hex : 40
BASIC: CHR$();”@”;