Gianni Industries Keyprox Plus - Manual

Statement
Features
Keyprox Plus
Access Control System
The system is based on a controller that
supports two readers which can be mounted up to
50 meters away from the controller with a simple
3 - w i r e c o n n e c t i o n . T h e c o n t r o l l e r c a n b e
configured to operate a single one-entry-and-exit
door or two independent doors.
The controller has a RS-232 connection
allowing single controller systems a simple
means of connecting to a PC provided that the
cable run is less than 30 meters. The controller
also has a RS-485 connection that will support up
to 16 controllers connected in a RS-485 network
to a PC thus allowing the control of up to 32 doors.
In this configuration the PC will require a 311
RS-232/485 Interface/Repeater to interface with
the RS-485 network. The Secure Card readers
are fully potted and suitable for mounting
outdoors. Tampering with these readers will not
impair the systems security.
The security is further enhanced by using the
Secure Card technology which prevents third
party from duplicating cards to operate on the
system. The controller has a 4-way dip switch to
set each unit to a unique address in the range 0-
15.
This address added to the reader identification
(reader A or B) uniquely identifies each reader for
programming and transaction reporting. Access
Parameter settings are used to define access
rights at each of the readers. Programming is
done from a PC using the KeyProx Plus Windows
software.
655-20
Controller
656-20-1
Secure Mini Reader
657-20-1
ANSI-sized Reader 311-30
RS-485 to RS-232
converter
Up to 16 controllers
one controller for 2 doors (one serving as entry
, the other as exit); one controller for 1 door
(serving as both entry and exit)
User friendly software
8 Access control levels
5 Time zones per access level
Up to 2000 users
Full reporting facility
User defined fields
Secure reader technology
Built-in backup/restore/repair facility
The software is required for all programming
of the system, downloading transactions and
printing reports.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-Keyprox Plus Ver. C Published on 2011.03.22
GIANNI INDUSTRIES, INC.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw