Gianni Industries EB-220-32 - Manual

Statement
Dimension
Specifications
Double Acting Doors
EB-220 Electric Dropbolt
EB-220-32 EB-220-38
Fail-Safe Version (Power to Lock)
Operating Voltage: 12 VDC
Voltage Tolerance: 10%
Current Draw:
Pull in: 0.9A, Holding: 0.3A/12V DC
(at temperature 20° C)
Magnetic bolt status output (SPDT rated 3A/30VDC)
indicates bolt locked or unlocked status.
Operating Temperature: -10~+45° C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
Tested to 500000 cycles.
Built-in logical circuitry
Auto-relocking Time Delay : 0, 3 ,6 ,9seconds
Face Plate Material: stainless steel
Net Weight: 1.0 Kg
double action door inswing Outswing
38
20
0
22
0
180
41
26
14
0
Unit: mm
The EB-220 electric dropbolt s are available in
32mm and 38mm wide faceplates. In this design
the EB-220 electric dropbolt comes from the same
logic circuit , this lock is the downsize version of
EB-262 (without position ball ).
Smart Circuitry
The vandal resistant circuitry means the door close sensor
can't be fooled into projecting the electric dropbolt unless the
door is actually closed. The reed sensor automatically
disconnects after the bolt is projected to enhance security of
the lock.
Auto-detective circuitry
The unique intelligent logic circuit in GEM's electric
dropbolts keeps the bolt retracted whilst the door is unlocked
until the door is properly closed. This feature ensures the bolt
will not extend if the door is improperly aligned.
EB-220 Electric dropbolt is specially designed for use on
double swinging doors. They can also be installed on both out
and in-swinging doors.
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-220 Ver. E Published on 2008.10.20 No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw