GE ML1600 - Manual (Page 95)

CHAPTER 5: IP ADDRESSING IPV6
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 5–33
Syntax telnet - telnet to an IPv6 station
Example – telnet fe80::220:6ff:fe25:ed80
Besides, if the end station supports IPv6 addressing (as most Linux and Windows systems
do), one can access the switch using the IPv6 addressing as shown in the example below
http://fe80::220:6ff:fe25:ed80
5.5.5 List of commands in this chapter
Syntax ipconfig [ip=] [mask=] [dgw=] [add|del]
– configure an IPv6 address. The add/delete option can be used to add or delete IPv4/IPv6
addresses.
Syntax show ipconfig – display the IP configuration information – including IPv6 address
Syntax ping6 - pings an IPv6 station
Syntax show ipv6 - displays the IPv6 information
Syntax ftp - ftp to an IPv6 station
Syntax telnet - telnet to an IPv6 station.