GE QS24 UR User Manual
Ur switch module ethernet communications switch, Quickstart guide, Ge consumer & industrial multilin
UR Switch Module
Ethernet Communications
Switch
Quickstart Guide
Firmware Revision 3.x
Manual P/N: 1601-9042-A1
Manual Order Code: GEK- 113423
Copyright © 2008 GE Multilin
GE Multilin
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: (905) 294-6222 Fax: (905) 201-2098
Internet:
*1601-0220-A1*
IISO9001:2000
GE
M ULTILI
N
RE
GISTERED
GE Multilin's Quality
Management System is
registered to ISO9001:2000
QMI # 005094
UL # E83849
GE Consumer & Industrial
Multilin
Table of contents
Document Outline
- QuickStart Guide
- QS.1 Introduction to Twisted Pair and Fiber Optic Ethernet LANs
- QS.2 10BaseT and 100BaseT Media
- QS.3 Hubs and Switches
- QS.4 Introduction to the 2S and 2T UR Managed Switch Modules:
- QS.4.1 Hardware Overview
- QS.4.2 2S and 2T LED indicators
- QS.4.3 Hardware Installation
- QS.4.4 initial Configuration Procedure
- QS.4.5 Configuring the Switch IP Address and Subnet Mask using EnerVista UR Setup Software.
- QS.4.6 Assigning an IP Address to the UR Switch Module using the Console Port
- QS.4.7 Assigning a static IP Address to a personnel computer
- QS.4.8 Self-test Errors and Meaning
- QS.5 Tagged VLAN’s
- QS.6 UR Switch Module Firmware Updates