Fujitsu Siemens Computers BS2000/OSD - Manual (Page 87)

U25339-J-Z126-1-7600 87
Standard processing in SVP mode Setting operating mode
6.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2
The operating mode can be reset using the PROGRAM LOAD FRAME: DETAIL-2. This
selects the appropriate firmware for running BS2000 or VM2000.
The following are specified in the example below:
● VM2000 operating mode
● executing IPL after reloading the firmware
Conditions
You must be in the PROGRAM LOAD FRAME: DETAIL-1 screen.
Invoke PROGRAM LOAD FRAME: DETAIL-2 screen
Ê Press the key.
The PROGRAM LOAD FRAME: DETAIL-2 screen appears:
Figure 43: PROGRAM LOAD FRAME: DETAIL-2 screen
VM MODE => Enter 3 for VM2000 operation.
EXA MODE => Always enter 1 .
IPL EXECUTION => Enter 1 .
P9
----- PROGRAM LOAD FRAME: DETAIL-2 ----- E02L01F
-VM MODE- -EXA MODE- -IPL EXECUTION-
==> 3 ==> 1 ==> 1
*1 NATIVE >*1 ENABLE >*1 ENABLE
*2 EMOS *2 DISABLE *2 DISABLE
>*3 AVM/EX
*ENTER EXECUTE
*PF3 GO TO BASIC FRAME
*PF9 GO TO DETAIL-1
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST