Fujitsu Siemens Computers BS2000/OSD - Manual (Page 77)

U25339-J-Z126-1-7600 77
Standard processing in SVP mode Selecting IORSF
6.5 Examples of standard processing in SVP mode
6.5.1 Selecting IORSF
The steps listed below are conditions for the loading of a particular IORSF at the next IMPL
or the next time the system is switched on.
In the following example the IORSF is selected with Level 2.
Conditions
You must have selected the “SVPST0 #1 (computer name)” window, created a link to the
$KVPHV0, and entered the correct password.
The MODE SELECTION FRAME is displayed:
Figure 36: MODE SELECTION FRAME screen
Invoking AUXILIARY FRAME: MENU screen
Ê Enter AU in the FUNCTION=> field and press
or
Ê Enter the FR AU command in line 24 and press .
----- MODE SELECTION FRAME ----- E02L01F
FUNCTION=>
- EXECUTION - - SELECTION - CPU SELECT=>
( 0 1 )
*1 CPU STOP *LD PROGRAM LOAD
*ST STATUS DISPLAY
*2 INTERRUPT *MA MANUAL OPERATION STOP/START MODE=>
*AD ALTER/DISPLAY
*3 TOD ENABLE *ME MESSAGE *1 ALL CPU
*CH CH/SUBCH STATUS >2 TARGET CPU
*4 SYSTEM RESET *AU AUXILIARY
*MF MSF
*5 SYSTEM RESET CLEAR *PA PERFORMANCE ANALYZER
*6 STORE STATUS
*7 RESTART
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
ENTER
ENTER