Fujitsu Siemens Computers BS2000/OSD - Manual (Page 83)

U25339-J-Z126-1-7600 83
Standard processing in SVP mode PROGRAM LOAD FRAME PRESET2
6.5.4 Setting up PROGRAM LOAD FRAME PRESET2
In the PROGRAM LOAD FRAME PRESET2 you specify which operating mode is to be set
after the S130 system is switched on.
The following are specified in the example below:
● VM2000 operating mode
● EXA mode
● Automatic startup of the operating system
Conditions
You must be in the AUXILIARY FRAME: LOAD PRESET1 screen.
Invoke AUXILIARY FRAME: LOAD PRESET2 screen
Ê Press the key in the AUXILIARY FRAME: LOAD PRESET1 screen
The AUXILIARY FRAME: LOAD PRESET2 screen is displayed:
Figure 41: AUXILIARY FRAME: LOAD PRESET2 screen
VM MODE => Enter 3 for VM2000 operation.
EXA MODE => Always enter 1 .
START IPL NO => Enter 1 .
P9
----- AUXILIARY FRAME: LOAD PRESET2 ----- E02L01F
-VM MODE- -EXA MODE-
==> 3 ==> 1
>1 NATIVE >1 ENABLE
*2 EMOS *2 DISABLE
*3 AVM/EX
-START IPL NO-
==> 1
*1 FIX(1)
>2 CURRENT
*PF12 CATALOG
*PF9 GO TO LOAD PRESET-1
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST