Activating iorsf, 2 activating iorsf – Fujitsu Siemens Computers BS2000/OSD User Manual
Page 80

80
U25339-J-Z126-1-7600
Activating IORSF
Standard processing in SVP mode
6.5.2
Activating IORSF
The set IORSF must be activated with a IMPL:
Conditions
You must be in the AUXILIARY FRAME: IORSF CONTROL screen.
Ê
Press
to switch back to the AUXILIARY FRAME: MENU.
Ê
Enter
4
in the
SELECTION=>
field. Press
.
The AUXILIARY FRAME: P-OFF/IMPL screen is displayed:
Figure 39: AUXILIARY FRAME : P-OFF/IMPL screen
Ê
Enter
2
in the
FUNCTION=>
field to execute an IMPL. Then press
.
The following prompt appears:
The IMPL must not be executed during system operation!
Ê
Press
to execute the IMPL or
, to cancel the procedure. Confirm your entry with
.
P3
ENTER
----- AUXILIARY FRAME: P-OFF/IMPL ----- E02L01F
FUNCTION=>
*1 POWER OFF
*2 IMPL
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
ENTER
***********************************
* *
* ARE YOU SURE ? (ENTER Y OR N) N *
* *
***********************************
!
Y
N
ENTER