Executing ipl in program load frame: detail, 5 executing ipl in program load frame: detail-1 – Fujitsu Siemens Computers BS2000/OSD User Manual
Page 84

84
U25339-J-Z126-1-7600
IPL in PROGRAM LOAD FRAME: DETAIL-1
Standard processing in SVP mode
Catalog parameters
Ê
Press the
key.
The values entered are saved and thus made known to the SVP. These settings are
accessed for each IPL.
6.5.5
Executing IPL in PROGRAM LOAD FRAME: DETAIL-1
The IPL can be executed manually 1according to the setting using PROGRAM LOAD
FRAME DETAIL-1.
The following are specified in the example below:
●
loading VM2000
●
dialog startup
●
IPL device is specified manually by the entry of the unit address
(here: loading the BS2000 from a device with the unit address A108)
Conditions
You must be in the AUXILIARY FRAME: LOAD PRESET2 screen.
Invoking the PROGRAM LOAD FRAME: DETAIL-1 screen
Ê
Press the
key to return to the MODE SELECTION FRAME.
Ê
Enter the frame code
LD
and press
.
Or enter the
FR LD
command in line 24 and press
.
After entering
LD
or
FR LD
in the MODE SELECTION FRAME, either the
PROGRAM LOAD FRAME: DETAIL-1 or the PROGRAM LOAD FRAME:
BASIC screen is displayed, depending on the INITIAL FRAME setting in the
AUXILIARY FRAME: LOAD PRESET1 screen (see page 82).
P12
F3
ENTER
ENTER
i