FUJITSU MHR2030AT - Manual (Page 5)

C141-E145-02EN i
Preface
This manual describes the MHR Series, 2.5-inch hard disk drives. These drives
have a built-in controller that is compatible with the ATA interface.
This manual describes the specifications and functions of the drives and explains
in detail how to incorporate the drives into user systems. This manual assumes
that the reader has a basic knowledge of hard disk drives and their
implementations in computer systems.
This manual consists of seven chapters and sections explaining the special
terminology and abbreviations used in this manual:
Overview of Manual
CHAPTER 1 Device Overview
This chapter gives an overview of the MHR Series and describes their features.
CHAPTER 2 Device Configuration
This chapter describes the internal configurations of the MHR Series and the
configuration of the systems in which they operate.
CHAPTER 3 Installation Conditions
This chapter describes the external dimensions, installation conditions, and switch
settings of the MHR Series.
CHAPTER 4 Theory of Device Operation
This chapter describes the operation theory of the MHR Series.
CHAPTER 5 Interface
This chapter describes the interface specifications of the MHR Series.
CHAPTER 6 Operations
This chapter describes the operations of the MHR Series.
Glossary
The glossary describes the technical terms that need to be understood to read this
manual.
Acronyms and Abbreviations
This section gives the meanings of the definitions used in this manual.