Furuno GPS NAVIGATOR GP-150 - Manual (Page 61)

8. MENU SETTINGS
8-13
4) Press the NU/CU ENT key.
5) Press or to select DGPS.
6) Press ▼ to select To Next Page.
To Previous Page
MSB
Parity Bit EVEN ODD NONE
Stop Bit 1 2
Baud Rate 4800 9600
DATA 4 I/O SETUP 2/2
MENU : Escape ENT : Enter
: Select
First Bit LSB
Figure 8-30 DATA 4 I/O SETUP
"DGPS" 2/2 menu
7) Press or to select First Bit.
8) Press or to select first bit; MSB or
LSB.
9) Press to select Parity Bit.
10) Press
or to select parity bit; EVEN,
ODD or NONE.
11) Press to select Stop Bit.
12) Press or to select stop bit; 1 or 2.
13) Press to select Baud Rate.
14) Press or to select baud rate; 4800
or 9600.
15) Press the MENU ESC key.
8.7 Displaying GPS Monitor
Displays
Three GPS monitor displays provide GPS
information:
•
Satellite monitor which shows position of
GPS satellites
• Beacon receiver monitor which displays
DGPS beacon station information
• DGPS beacon station message monitor
which displays messages received from
beacon stations
To display the GPS monitor displays;
1) Press MENU ESC and 7.
2) Press
to display the GPS monitor
you want to view.
3) Press the MENU ESC to escape.
MENU:Escape
JAN 21, 2009 23:59’59" U
:Beacon RCVR Monitor
DOP:1.5
SV (PRN) SNR
30 40 50
01
12
31
16
18
19
09
08
Fixing date and time
GPS fix
state
Satellite
distribution
Number, bearing and elevation angle of all satellites
in view of the GPS receiver appear. Satellites being
used in fixing position are circled with a solid line;
satellites not being used in fixing position are circled
with a dashed line.
Receive signal level
DOP value
Satellites Monitor
N
S
W E
01 12
31
09
18
19
08
16
(When signal level is more than 35, it is
used for positioning.)
Satellite number with circle
is used for positioning.
24
24
W3D 100m
* SAFE
134 *
*: This indication appears in the WAAS mode.
MENU:Escape
JAN 21, 2009 23:59’59" U
:Station Message
DGPS Integrity Status
ID: _ _ _ _
Bit Rate: _ _ _ bps
SIG Strength: _ _ dB
Health: _
FREQ:_ _ _ . _kHz
SNR: _ _ dB
DGPS Data: Good
Beacon Station:
MENU:Escape
JAN 21, 2009 23:59’59" U
:Satellites Monitor
Message:
Good
DGPS data and DGPS
station receiving condition
DGPS station
data
Beacon Receiver Monitor
Station Message
Return to Satellites
Monitor
D3D 100m
* SAFE
D3D 100m
* SAFE
Figure 8-31