FARGO electronic HDP600 - Manual (Page 29)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 2-11
Technical Specifications (continued)
Term Description
Memory 8 MB RAM; expandable to 32 MB RAM
Operating
Temperature 65
º
F to 80
º
F (18
º
C to 27
º
C).
Options

The options are the 32MB RAM Upgrade Kit

Printer Cleaning Kit

External Print Server (Windows only; required for stand-alone
networking of Printer/Encoder)

Card Lamination Module
Output Hopper
Card Capacity HDP600/HDP600-LC

100 cards (.030/.762mm)
HDP600 CR100/HDP600-LC CR100:

100 cards (.030/.762mm)
Overlaminate
Options
(HDP600-LC and
HDP600-LC
CR100 only) All overlaminates are available in either clear, holographic globe
design or custom holographic design. They can also be optimized
for use with smart cards and Magnetic Stripes.
PolyGuard is available in CR-80 patch sizes (HDP600-LC only).
Here are the options:

Thermal Transfer Overlaminate, .25 mil thick, 500 prints

PolyGuard Overlaminate, .6 mil thick, 250 prints

PolyGuard Overlaminate, 1.0 mil thick, 125 prints
Power Supply

80W for HDP600

160W (two 80W bricks) for the HDP600-LC
Print Area Over-the-edge on all accepted standard card sizes.
Printing Method HDP
™
Dye-Sublimation/Resin Thermal Transfer