FARGO electronic HDP600 - Manual (Page 237)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-26
Adjusting the Ribbon Type
Use the Ribbon Type dropdown menu to match Ribbon type.
Step Procedure
1 Adjust to match the Ribbon Type selection with the Ribbon type that is
loaded in the Printer. (Note: The User can to the System Information Menu
in the LCD and the Printer will tell the User which Ribbon is loaded at that
time.)

YMC: Yellow, Magenta, Cyan
OR
YMCK: Yellow, Magenta, Cyan, Resin Black
OR

YMCKK: Yellow, Magenta, Cyan, Resin Black, Resin Black
OR

YMCKH: Yellow, Magenta, Cyan, Resin Black, Heat Seal (Note: This is
not available on the HDP600 CR100 and HDP600-LC CR100.)