FARGO electronic HDP600 - Manual (Page 186)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 5-48
Resetting to Default Settings
The Reboot page also allows the User to reboot the Ethernet Print Server into a default
settings mode. (Note: This simply restarts the Printer in a different state with the settings in
memory temporarily ignored.)
When the Default button is selected, the stored settings in the Printer
’
s memory are not
changed.
Step Procedure
1 Select the Administration link.
2 Log in as a root User (using the old password) if you are so prompted.
(Note: Any change of setting will only be accepted after you have
successfully logged in.)
3 Select the Reboot link.
4 Select the Default button.
5 Click the Yes button when prompted.
6 Wait for the Printer to reboot and display the home page.