Fortinet FortiOS 3.0 - Manual (Page 41)

Reverting to FortiOS v2.80MR11 Restoring your configuration
Update Guide for FortiOS v3.0
01-30000-0317-20060424
41
5 Enter the following command to copy the backup configuration file to restore the
file on the FortiGate unit:
execute restore allconfig
Where is the name of the backup configuration file and
is the IP address of the TFTP server and is the
password you entered when you backup your configuration settings. For example,
if the backup configuration file is confall and the IP address of the TFTP server
is 192.168.1.168 and the password is ghrffdt123:
execute restore allconfig confall 192.168.1.168 ghrffdt123
The FortiGate unit responds with the message:
This operation will overwrite the current settings and the
system will reboot!
Do you want to continue? (y/n)
6 Type y.
The FortiGate unit uploads the backup configuration file. After the file uploads, a
message, similar to the following, is displayed:
Getting file confall from tftp server 192.168.1.168
##
Restoring files...
All done. Rebooting...
This may take a few minutes.
Use the show shell command to verify your settings are restored, or log into the
web-based manager.
See “Restoring your configuration” on page 40 to restore you FortiOS v2.80MR11
configuration settings.