Fortinet FortiOS 3.0 - Manual (Page 30)

Upgrade Guide for FortiOS v3.0
30 01-30000-0317-20060424
HA New features and changes
The web trends option and traffic filtering are now available in the CLI. See the
FortiGate CLI Reference for more information.
Logging options for various protocols and traffic is now in the Protection Profiles
menu.
Log Access
The Log Access menu has two tabs. The Memory tab displays log event types
that are logged to memory. The FortiAnalyzer tab displays log types that are
logged to the FortiAnalyzer unit.
An additional tab for Disk appears on FortiGate units with a hard disk. Use the
pull-down menu to select a different log type.
Report
The Report menu, new to the Log and Report menu, provides you with access to
a full range of different reports from the FortiAnalyzer unit if connected.
You can choose the Basic Traffic report or access any type of FortiAnalyzer report
to display logs. The Basic Traffic report uses log information stored in the
FortiGate unit’s memory and displays the information in two types of bar graphs
on the Report Access page.
You can choose from over a thousand of FortiAnalyzer reports to display logs.
Also, you can customize a default report for your FortiGate unit.
You can also select what you want included in your report from Newsgroups to
VoIP.
HA
There are significant changes, including new features, for high availability in
FortiOS 3.0. The most significant change for HA is virtual clustering, where you
can configure HA for individual virtual domains. The virtual clustering can handle
two FortiGate units per virtual cluster.
The FortiGate Administration Guide (System Config chapter, HA section),
FortiGate CLI Reference (system chapter, ha section), and the FortiGate online
help provides additional information on changes to existing features and new
features in FortiOS 3.0.
In the System menu, HA is now a tab in System > Config > HA. You can
configure HA settings for your FortiGate unit from this tab. However, Unit Priority
setting is now Device Priority and Override Master is now enabled by default.
Note: Log filter is now included in Firewall > Protection Profile > Logging. You can also
enable this feature in the CLI. Also, Traffic Filter is now available in the CLI. See the
FortiGate CLI Reference for more information.
Note: The FortiGate High Availability (HA) Guide will be available soon.