FARGO electronic HDP5000 User Manual

Page 64

Text mode
Original mode

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)

3-21

Connecting Power to HDP5000 Printer and Lamination Module (continued)

Display B - Connecting the other end of the AC power cable to a Surge Protector. See both
notes below.

Note No. 1: Instead of connecting the AC power cable directly into an AC outlet, it is
recommended that a Surge Protector be used to protect against power surges.

Note No. 2: Some buildings have surge protection built into the electrical outlets. Please
consult your building supervisor regarding this feature.