FARGO electronic HDP5000 - Manual (Page 340)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3) 9-31
Using the Lamination Card Backup Option
This option changes distance card backs up after lam pressure is first applied
Using the lamination Card Length Option
This option dictates length of card (should not be adjusted)
Reviewing the No Printer Connected error message
If there is no Printer connected or if the Driver is unable to communicate with the Printer, the
following error will be displayed and the grid will be blank.
Reviewing the Value outside the Range error message
If typing a value outside the range, an error message will display specific to the setting when
leaving the spin control to click any other spin control, button or tab.