Specifying tcp event logging, Specifying tcp event logging -35 – FARGO electronic HDP5000 User Manual
Page 164
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
6-35
Specifying TCP Event logging
Follow this procedure to send logging messages to a pre-existing IP connection made on the
TCP port.
Step Procedure
1 Select
the
System Log link.
2
Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3 Select
the
TCP Connection radio button.
4 Select
Submit.
5
Login as a root User if you are so prompted. Any change of setting will only be
accepted after you have successfully logged in.