Selecting the log destination, Selecting the log destination -31 – FARGO electronic HDP5000 User Manual
Page 160
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
6-31
Selecting the Log Destination
Specify one destination for the log.
Step
Procedure – No event logging.
1 Select
the
System Log link.
2
Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3 Select
the
None radio button when no log is required. (Note: This is the
default.)
4 Select
Submit.
5
Login as a root User if you are so prompted. Any change of setting will only
be accepted after you have successfully logged in.