Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 67)

Chapter 3 DR User Interface 3-5
3.1.2 Displaying Domain Status
The showdomainstatus(8) command lists the domains in the system and their
status. This command displays the same domain status information as the
showdcl
(8) command.
Use the showdomainstatus(8) command to check domain status before and after a
DR operation.
The following examples show the format and options of the showdomainstatus(8)
command:
The table below lists the items displayed by the showdomainstatus(8) command.
showdomainstatus -a
showdomainstatus -d domain_id
showdomainstatus -h
TABLE 3-5 Options of the showdomainstatus Command
Option Description
-a Displays the status of all domains.
-d domain_id Displays information about the specified domain, where domain_id is
the domain number, possibly 0 to 23, depending on server model.
Only one domain ID can be specified.
-h Displays usage information.
TABLE 3-6 Items of Domain Information to be Displayed
Display items Description
DID Domain ID