Fujitsu Siemens Computers SPARC Enterprise M8000 User Manual
Page 135
Appendix A
Message Meaning and Handling
A-19
[Explanation] The node was not destroyed.
[Remedy] Please contact customer service.
IKP: destroy chip (
[Explanation] The node was not destroyed.
[Remedy] Please contact customer service.
dr_del_mlist_query: mlist=NULL
[Explanation] The memory list to be deleted is NULL. This warning is also shown
at memoryless board.
[Remedy] Please ignore this message on memoryless boards. If DR failed after
this message, please contact customer service.
dr_memlist_canfit: memlist_dup failed
[Explanation] System might have run out of memory. Or there is a memoryless
board.
[Remedy] Please ignore this message on memoryless boards. If DR failed after
this message, please check if the system has enough memory resource and repeat
the action. If the error remains, please contact customer service.
Cannot get floating-boards proplen
[Explanation] Failed to get property information of floating-boards.
[Remedy] Please contact customer service.
Cannot get floating-boards prop
[Explanation] Failed to get property information of floating-boards.
[Remedy] Please contact customer service.
Device node 0x
[Explanation] The device node has invalid property value.
[Remedy] Please contact customer service.
DR - IKP initialization failed
[Explanation] IKP initialization failed
[Remedy] Please contact customer service.
I/O callback failed in pre-release
[Explanation] I/O callback failed in pre-release