A.2.2 deleteboard, A.2.2, Deleteboard – Fujitsu Siemens Computers SPARC Enterprise M8000 User Manual
Page 142: A–26
A-26
SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
An internal error has occurred. Please contact your system
administrator.
[Explanation] DR failed. There is a possibility that DR failed because of an
internal error in XSCF.
[Remedy] Find out the cause of the DR failure referring monitoring message and
error log. Please also confirm the XCP version.
Timeout detected during self-test of XSB#XX-X.
[Explanation] Because the hardware diagnosis in DR did not complete, a timeout
occurred. There is a possibility that a hardware error occurred.
[Remedy] Find out the cause of the DR failure referring monitoring message and
error log. Replace the failure component.
A.2.2
deleteboard
XSB#XX-X will be unassigned from domain immediately. Continue?
[y|n]:
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
XSB#XX-X will be unconfigured from domain immediately.
Continue? [y|n]:
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
XSB#XX-X will be unassigned from domain after the domain
restars. Continue? [y|n]:
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
DR operation canceled by operator.
[Explanation] DR operation canceled by operator
XSB#XX-X is not installed.
[Explanation] System board (XSB#XX-X) is not installed.
[Remedy] Specify the wrong XSB. Confirm the XSB by showboards(8).
XSB#XX-X is currently unavailable for DR. Try again later.