Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 120)

A-4 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
[Explanation] Internal error during kernel migration
[Remedy] Please contact customer service.
CPU nn hang during Copy Rename
[Explanation] A fatal HW error was encountered during copy-rename.
[Remedy] Please contact customer service.
A.1.3 Warning Messages
# megabytes not available to kernel cage
[Explanation] Lack of memory resource deleted.
[Remedy] Detach the board, then attach it again.
IKP: init failed
[Explanation] The initial device tree walk to locate the nodes that are interesting
to IKP fails.
[Remedy] Please contact customer service.
dr#: failed to alloc soft-state
[Explanation] Failed to allocate soft-state due to lack of the memory resource
[Remedy] Repeat the action. If this error message appears again, please contact
customer service.
dr#: module not yet attached
[Explanation] Failed to attach the DR driver.
[Remedy] Repeat the action. If this error message appears again, please contact
customer service.
dr_add_memory_spans: unexpected kphysm_add_memory_dynamic return
value X; basepfn=Y, npages=Z
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
dr_cancel_cpu: failed to disable interrupts on cpu X
[Explanation] Failed to disable interrupt on CPU X.